High Quality Filler Yarn, Viscose Yarn , Fancy Yarn Suppliers in China

Home > Products > Filler Yarn > 100KD SINGLE LOW shrinkage high strength polypropylene filler/pp filler for cable and wire

100KD SINGLE LOW shrinkage high strength polypropylene filler/pp filler for cable and wire

Product Description

Product Description

PP Filler Yarn(non-twist)

The product should be white ,dry clean,soft and uniform thickness.

The specifications of the filling line size should comply with the provisions in the table

Item(mm)

PP filler yarn(non-twist)

Specifications(mm)

30

60

90

120

160

180

270

360

Membrane width error(mm)

±3.0

±5.0

±6.0

 

Thickness(mm)

0.08

Thickness of the error(mm)

0.01

After Nian corresponding diameter(mm)

2.0

2.0

4.0

4.5

5.0

5.5

6.0

7.0

The diameter tolerance(mm)

±0.3

±0.4

±0.6

±0.6

±0.6

±0.7

±0.7

±0.7

Twist(mm)

3.0

3.0-3.5

 Physical and mechanical properties shall meet the provisions of the table

Properties

Breaking strength(flame retardant)≥N

 

 

elongation≤

Unit weight(flame retardant)g/m

 

 

Oxygen index(%)

Corresponding value

30

49(50)

15

≤1.03

≥28

2.0±0.3

60

63(100)

20

≤2.02(1.70)

3.0±0.4

90

95(150)

20

≤2.90(2.55)

4.0±0.6

120

127(200)

25

≤3.86(3.4)

4.5±0.6

160

158(200)

25

≤4.64(4.38)

5.0±0.6

180

191(200)

25

≤5.42(4.96)

5.5±0.7

270

220(200)

30

≤8.44(7.60)

6.0±0.7

360

220(200)

30

≤11.5

7.0±0.7

 PP filler yarn(twist)

 Physical and mechanical properties shall meet the provisions of the table

Fill the rope specifications

Diameter

Quality of unit length(fiame retardant is not more than)

 

 

Twist

mm

mm

g/m

a/200mm

Φ8

8±0.5

31.5(28)

3.0-3.5

Φ10

10±0.6

42.5(39)

Φ12

12±0.6

54(48)

Φ15

15±0.8

77(75)

Φ18

18±1.0

110(108)

Φ20

20±1.0

153(147)

Φ24

24±1.5

205(200)

 LSHF flame retardant filler yarn

New product-(LSHF)LOW smoke zero halogen fire retardant PP filler yarn—the product which will replace glass fiber rope

Glass fiber rope and asbestos rope are mainly used for fire retardant cable filling marketing in the past 10 years. But they still have some disadvantages ,such like usability and environmental protection issues. Considering this marketing demand ,we developde this (LSOH)low smoke zero halogen fire retardant filler.ol-28,with the advantage of environmentally friendly ,low smoke and little proporty.

LSHF flame retardant filler yarn ,glass fiber rope ,asbestos rope the comparison of the three

Item

Diameter(mm)

Weight(g/m)

Lol

Eco-friendly

Proportion(g/cm³)

Smoke intensity

usability

Glass fiber

2

4.5

30

N

2.7

Gneral

harmful

Asbestos

2

4.5

30

N

2.7

General

NO eco-friendly

PP fire retardant

2

2

28

Y

0.92

sight

convenient

 

High flame resistance,high temperature filler yarn

Product description

The product uses a special process,with high flame retardancy can be achieved refractory grade oxygen index 45 .suitable for flame retardant power cables ,fire-retardant mining cable,marine cables flame retardant ,flame retardant silicone rubber cables and other high temperature flame retadant cables.

Advantage

High temperature ,high flame,soft,light weight and high strength. Non halogens,non asbestos ,non glass fibers and other harmful substances .suitable for various of halogen-free cables.

Features

Light weight, coust-effective.the production of this product is glass fiber 1/4 ,mineral wool 1/4 ,fire-retardant rubber 1/7 ,flame-retardant filler yarn can reduce production costs and enhance cable permance. The product has been passed the test of national wire and cable test center ,comply with environmental and retardant requirents.

Type

Diameter(mm)

Appearance

Weight(g/m)

Tensile strength(N/20cm)

Elongation

 

Long term stability(℃)

Oxygen index(%)

Melting point(℃)

1

1±0.5

Round

2.5±0.5

≥30

≥20

200

≥40

260

2

2±0.5

Round

4.0±0.5

≥70

≥20

200

≥40

260

3

3±0.5

Round

5.0±0.5

≥80

≥20

200

≥40

260

4

4±0.5

Round

7.5±1

≥100

≥20

200

≥40

260

5

5±1

Round

10±2

≥120

≥20

200

≥40

260

6

6±1

Round

13.5±2

≥150

≥20

200

≥40

260

 

Functions

Our company is specialized in producing cable filler yarn series, exporting many countries and many domestic partners.

This product is a special wire and cable manufacturing filler yarn, the use of polypropylene particles as the main raw material, adopt extrusion molding method, filling with polypropylene mesh tearing fiber (filler yarn), can make the cable is strong enough, strong flexibility.
filler yarn is divided into single stocks and shares, according to the customer request processing, processing of twist size adjustable, high tensile strength, wire and cable filling and increase the applied for use, there are other requirements can be appropriate processing.
Characteristics of this product is non-toxic, no impurities, evenness good uniformity, good strength, not easy to break, mildew, corrosion, heat resistance and other physical and chemical properties, and has a high frequency insulation performance is good, high breakdown voltage, the whole volume without a joint, improve the efficiency of wire and cable production.

 

Production Line

Our cable filler yarn equipment

Our equipment for producing cable filler yarn is advanced, and our employees have been working on the highest quality cable filler yarn.

First, prepare raw material polypropylene particles and plastic mother material, and mix evenly according to certain proportion.

Second, stir the raw materials into the storage box.

Third, host preparation (host, oven heating).

Fourth, start the main engine, each traction roller.

Fifth, extruded the film.Then divide the blade into the required size of the customer.After that, we will dry the oven.

Sixth, we are going to have a needle roller to open the grid.

Finally, start the rewinding machine (wire to the paper tube core).
And roll (pull out the full volume).

 

Testing equipment

This is a twist machine, which is used to detect the twist of the finished cable filler yarn.

 

This is the pull machine, which is used to detect the tension and elongation of the cable filler yarn.

 

Packaging & Shipping

Packaging and Transportation:

1,cable filler yarn package according to customer

2,commonly we use pallet to load the cable filler yarn

3,we cooperate with the best forwarder and shipping company to ensure your cable filler yarn arrive in time.

 

Company Information

 

Our Services

We will deliver the cable filler yarn according to your requirements within the stipulated time. We will serve you wholeheartedly and will always put your interests first.

After Service:

1. Best Quality and Best Service for any orders,including the cable filler yarn. No matter big or small orders.

2. One year Warranty for our cable filler yarn.

3. Please contact us if you need our cable filler yarn.After Service Dept,inform us what's the problem you met.

4. We provide resolve methods for you about the cable filler yarn and anything interesting.

our honor

We are the authoritative manufacturer of cable accessories in jiangsu province. We are honest, we are timely, our products are of good quality, and we are the most correct decision. Also,we have many certificates of honor about the cable filler yarn.

 

Company Information   

       Wuxi Henglong cable Material Co.,Ltd.Located in Yixing City,Jiangsu Province.The company is establshed in 1990,focus on the developeding,producing ,sales and services of all kinds of cable or agriculture materials.It covers an area of 20000 square meters,and annual output value is over 150 million RMB.

       In the beginning,the company mainly produced PP fillers,FR fillers,PE foaming filling strip,cable filler yarn,etc.With the development of company ,new products like high temperature Identification Tape,LSHF tape,all kinds of PVC materials,PP black tape,PET tape,FR-cable filler yarn,submarine cable PP Rope have bring into production .Especially export cable filler yarn,has gained the recognition of famous cable manufacturer OCC Japan ,and become their qualified vendor in Asia.For present ,the company has many products in all kinds and specifications with professional equipments.such as cable filler yarn production line ,blown film mesh belt production line ,extruding machine ,granulating machine ,cutting machine ,grinding machine ,twist machine ,etc.At the same time,company purchased many kinds of test equipements,like control force instrument ,analytical balance ,aging test chamber ,resistance meter ,electron density instrucment,thickness gauge ,etc.Our main customer in China including :Far-east  Cable ,Jiangsu Shanghai Cable ,Jiangnan Cable ,Hongqi Cable ,ZTT cable ,Ningbo Dongfang Cable ,TBEA Cable ,NKT Cable ,Qingdao Hanhe Cable ,Changzhou Bayi Cable.etc.The company developed a lot of new technology via cooperating with Nanjing University ,has gained two letters patent of cable filler yarn and FR-LSHF filling strip.

      Welcome to Henglong Cable.

 

 

Other products

Other popular products of the company

 

 

    

 

 

 

 

Contact us if you need more details on Polypropylene Filler. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Pp Cable Filler Yarn、Cable Filler. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Filler Yarn

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters